PV、VG、LV
服务器磁盘分区情况：
[root@iZ25ou6jy8jZ ~]# fdisk -l
Disk /dev/xvda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00060953
Device Boot Start End Blocks Id System
/dev/xvda1 * 1 2611 20970496 83 Linux
Disk /dev/xvdb: 322.1 GB, 322122547200 bytes
255 heads, 63 sectors/track, 39162 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[root@iZ25ou6jy8jZ ~]#
[root@iZ25ou6jy8jZ ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/xvda1 20G 1.4G 18G 8% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
1. 查看有无安装lvm
# rpm -qa|grep lvm
lvm2-libs-2.02.100-8.el6.x86_64
mesa-private-llvm-3.3-0.3.rc3.el6.x86_64
lvm2-2.02.100-8.el6.x86_64
2. 将磁盘/dev/xvdb分区并转为lvm磁盘
[root@iZ25ou6jy8jZ ~]# fdisk /dev/xvdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x035ef8d3.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n //n进入分区模式
Command action
e extended
p primary partition (1-4)
p //设置为主分区
Partition number (1-4): 1 //设置分区号
First cylinder (1-39162, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-39162, default 39162):
Using default value 39162
Command (m for help): p //查看当前分区情况
Disk /dev/xvdb: 322.1 GB, 322122547200 bytes
255 heads, 63 sectors/track, 39162 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x035ef8d3
Device Boot Start End Blocks Id System
/dev/xvdb1 1 39162 314568733+ 83 Linux
Command (m for help): l //l查看对应文件系统对应的代码
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx
5 Extended 42 SFS 86 NTFS volume set da Non-FS data
6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility
8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt
9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access
a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary
16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT
1e Hidden W95 FAT1
Command (m for help): t //t进入修改分区代码模式
Selected partition 1
Hex code (type L to list codes): 8e //设置为8e，即Linux LVM
Changed system type of partition 1 to 8e (Linux LVM)
Command (m for help): p //p打印出修改结果
Disk /dev/xvdb: 322.1 GB, 322122547200 bytes
255 heads, 63 sectors/track, 39162 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x035ef8d3
Device Boot Start End Blocks Id System
/dev/xvdb1 1 39162 314568733+ 8e Linux LVM
Command (m for help): w //w保存修改并退出
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@iZ25ou6jy8jZ ~]#
[root@iZ25ou6jy8jZ ~]# fdisk -l
Disk /dev/xvda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00060953
Device Boot Start End Blocks Id System
/dev/xvda1 * 1 2611 20970496 83 Linux
Disk /dev/xvdb: 322.1 GB, 322122547200 bytes
255 heads, 63 sectors/track, 39162 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x035ef8d3
Device Boot Start End Blocks Id System
/dev/xvdb1 1 39162 314568733+ 8e Linux LVM
[root@iZ25ou6jy8jZ ~]#
开始创建
3. 创建PV物理卷
[root@iZ25ou6jy8jZ ~]# pvcreate /dev/xvdb1
Physical volume "/dev/xvdb1" successfully created
4. 创建VG卷组
[root@iZ25ou6jy8jZ ~]# vgcreate VolGroup /dev/xvdb1 //VolGroup为卷组名称
Volume group "VolGroup" successfully created
5. 激活卷组
[root@iZ25ou6jy8jZ ~]# vgchange -a y VolGroup
Volume group "VolGoup" not found
Skipping volume group VolGoup
6. 创建LV逻辑卷
[root@iZ25ou6jy8jZ ~]# lvcreate -L 102400 -n data VolGroup
Logical volume "data" created
102400代表100GB，data表示逻辑卷名称
删除LV逻辑卷：
如已经创建了文件系统并挂载，先umount已经挂载的目录
# umount /data/
# lvremove /dev/VolGroup/data
Do you really want to remove active logical volume content? [y/n]: y
Logical volume "data" successfully removed
扩展LV卷：
[root@iZ25hxew2yfZ ~]# lvextend -L +51200 /dev/VolGroup/data
Extending logical volume opt to 450.00 GiB
Logical volume opt successfully resized
刷新容量：
[root@iZ25hxew2yfZ ~]# resize2fs /dev/VolGroup/data
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev/VolGroup/data is mounted on /opt; on-line resizing required
old desc_blocks = 25, new_desc_blocks = 29
Performing an on-line resize of /dev/VolGroup/data to 117964800 (4k) blocks.
The filesystem on /dev/VolGroup/data is now 117964800 blocks long.
7. 创建文件系统
[root@iZ25ou6jy8jZ ~]# mkfs.ext4 /dev/VolGroup/data //格式化为ext4
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
6553600 inodes, 26214400 blocks
1310720 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
800 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 20 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@iZ25ou6jy8jZ ~]#
8. 挂载
[root@iZ25ou6jy8jZ ~]# mkdir /data
[root@iZ25ou6jy8jZ ~]# mount /dev/VolGroup/data /data/
[root@iZ25ou6jy8jZ ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/xvda1 20G 1.4G 18G 8% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/mapper/VolGroup-data
99G 188M 94G 1% /usr/local/data
[root@iZ25ou6jy8jZ ~]#
9.开机时挂载，在/etc/fstab末尾添加以下：
/dev/VolGroup/data /data ext4 defaults 0 0
10.reboot重启服务器测试是否成功。