linux下串口编程设置函数---------set_opt(fd1,115200,8,'N'1)--------------------

open /dev/ttys0, 设备文件之后，得到文件描述符， 对串口进行设置。

/**
*串口设置函数：例(fd1, 115200, 8, 'N', 1);
*参数：
*fd:串口设备节点
*nSpeed:波特率
*nBits:数据位
*nEvent:校验位
*nStop:停止位
*返回值：成功 -- 0
*		 失败 -- -1
*/
int set_opt(int fd,int nSpeed, int nBits, char nEvent, int nStop)
{
	struct termios newtio,oldtio;
	if  ( tcgetattr( fd,&oldtio)  !=  0) {
		perror("SetupSerial 1");
		return -1;
	}
	bzero( &newtio, sizeof( newtio ) );
	newtio.c_cflag  |=  CLOCAL | CREAD;
	newtio.c_cflag &= ~CSIZE;

	switch( nBits )
	{
	case 7:
		newtio.c_cflag |= CS7;
		break;
	case 8:
		newtio.c_cflag |= CS8;
		break;
	}

	switch( nEvent )
	{
	case 'O':
		newtio.c_cflag |= PARENB;
		newtio.c_cflag |= PARODD;
		newtio.c_iflag |= (INPCK | ISTRIP);
		break;
	case 'E':
		newtio.c_iflag |= (INPCK | ISTRIP);
		newtio.c_cflag |= PARENB;
		newtio.c_cflag &= ~PARODD;
		break;
	case 'N':
		newtio.c_cflag &= ~PARENB;
		break;
	}

	switch( nSpeed )
	{
	case 2400:
		cfsetispeed(&newtio, B2400);
		cfsetospeed(&newtio, B2400);
		break;
	case 4800:
		cfsetispeed(&newtio, B4800);
		cfsetospeed(&newtio, B4800);
		break;
	case 9600:
		cfsetispeed(&newtio, B9600);
		cfsetospeed(&newtio, B9600);
		break;
	case 115200:
		cfsetispeed(&newtio, B115200);
		cfsetospeed(&newtio, B115200);
		break;
	case 460800:
		cfsetispeed(&newtio, B460800);
		cfsetospeed(&newtio, B460800);
		break;
	default:
		cfsetispeed(&newtio, B9600);
		cfsetospeed(&newtio, B9600);
		break;
	}
	if( nStop == 1 )
		newtio.c_cflag &=  ~CSTOPB;
	else if ( nStop == 2 )
	newtio.c_cflag |=  CSTOPB;
	newtio.c_cc[VTIME]  = 0;
	newtio.c_cc[VMIN] = 0;
	tcflush(fd,TCIFLUSH);
	if((tcsetattr(fd,TCSANOW,&newtio))!=0)
	{
		perror("com set error");
		return -1;
	}
//	printf("set done!\n\r");
	return 0;
}