onTach介绍
ontach是Android系统中整个事件机制的基础。Android中的其他事件，如onClick、onLongClick等都是以onTach为基础的。
onTach包括从手指按下到离开手机屏幕的整个过程，在微观形式上，具体表现为action_down、action_move和action_up等过程。
onTach两种主要定义形式如下：
1.在自定义控件中，常见的有重写onTouchEvent(MotionEvent ev)方法。如在开发中经常可以看到重写的onTouchEvent方法，
并且其中有针对不同的微观表现（action_down、action_move和action_up等）做出的相应判断，执行逻辑并可能返回不同的布尔值。
2.在代码中，直接对现有控件设置setOnTouchListener监听器。并重写监听器的onTouch方法。onTouch回调函数中有view和MotionEvent
onTouch事件传递机制
大家都知道一般我们使用的UI控件都是继承自共同的父类——View。所以View这个类应该掌管着onTouch事件的相关处理。那就让我们去看看：在View中寻找Touch相关的方法，其中一个很容易地引起了我们的注意： dispatchTouchEvent(MotionEvent event) 。
根据方法名的意思应该是负责分发触摸事件的，下面给出了源码：
/** * Pass the touch screen motion event down to the target view, or this * view if it is the target. * * @param event The motion event to be dispatched. * @return True if the event was handled by the view, false otherwise. */ public boolean dispatchTouchEvent(MotionEvent event) { // If the event should be handled by accessibility focus first. if (event.isTargetAccessibilityFocus()) { // We don't have focus or no virtual descendant has it, do not handle the event. if (!isAccessibilityFocusedViewOrHost()) { return false; } // We have focus and got the event, then use normal event dispatch. event.setTargetAccessibilityFocus(false); } boolean result = false; if (mInputEventConsistencyVerifier != null) { mInputEventConsistencyVerifier.onTouchEvent(event, 0); } final int actionMasked = event.getActionMasked(); if (actionMasked == MotionEvent.ACTION_DOWN) { // Defensive cleanup for new gesture stopNestedScroll(); } if (onFilterTouchEventForSecurity(event)) { //noinspection SimplifiableIfStatement ListenerInfo li = mListenerInfo; if (li != null && li.mOnTouchListener != null && (mViewFlags & ENABLED_MASK) == ENABLED && li.mOnTouchListener.onTouch(this, event)) { result = true; } if (!result && onTouchEvent(event)) { result = true; } } if (!result && mInputEventConsistencyVerifier != null) { mInputEventConsistencyVerifier.onUnhandledEvent(event, 0); } // Clean up after nested scrolls if this is the end of a gesture; // also cancel it if we tried an ACTION_DOWN but we didn't want the rest // of the gesture. if (actionMasked == MotionEvent.ACTION_UP || actionMasked == MotionEvent.ACTION_CANCEL || (actionMasked == MotionEvent.ACTION_DOWN && !result)) { stopNestedScroll(); } return result; }
源码有点长，但我们不必每一行都看。首先注意到dispatchTouchEvent的返回值是boolean类型的，注释上的解释：@return True if the event was handled by the view, false otherwise.也就是说如果该触摸事件被这个View消费了就返回true，否则返回false。在方法中首先判断了该event是否是否得到了焦点，如果没有得到焦点直接返回false。然后让我们把目光转向if (li != null && li.mOnTouchListener != null&& (mViewFlags & ENABLED_MASK) == ENABLED&& li.mOnTouchListener.onTouch(this, event))这个片段，看到这里有一个名为li的局部变量，属于 ListenerInfo 类，经 mListenerInfo 赋值得到。ListenerInfo只是一个包装类，里面封装了大量的监听器。
再在 View 类中去寻找 mListenerInfo ，可以看到下面的代码：
ListenerInfo getListenerInfo() { if (mListenerInfo != null) { return mListenerInfo; } mListenerInfo = new ListenerInfo(); return mListenerInfo; }
因此我们可以知道mListenerInfo是不为空的，所以li也不是空，第一个判断为true，然后看到li.mOnTouchListener，前面说过ListenerInfo是一个监听器的封装类，所以我们同样去追踪mOnTouchListener：
/** * Register a callback to be invoked when a touch event is sent to this view. * @param l the touch listener to attach to this view */ public void setOnTouchListener(OnTouchListener l) { getListenerInfo().mOnTouchListener = l; }
正是通过上面的方法来设置 mOnTouchListener 的，我想上面的方法大家肯定都很熟悉吧，正是我们平时经常用的 xxx.setOnTouchListener ，好了我们从中得知如果设置了OnTouchListener则第二个判断也为true，第三个判断为如果该View是否为enable，默认都是enable的，所以同样为true。还剩最后一个：li.mOnTouchListener.onTouch(this, event) ，显然是回调了第二个判断中监听器的onTouch()方法，如果onTouch()方法返回true,则上面四个判断全部为true,dispatchTouchEvent()方法会返回true，并且不会执行if (!result && onTouchEvent(event))这个判断；而在这个判断中我们又看到了一个熟悉的方法：onTouchEvent() 。所以想要执行onTouchEvent，则在上面的四个判断中必须至少有一个false。
那就假定我们在onTouch()方法中返回的是false，这样就顺利地执行了onTouchEvent，那就看看onTouchEvent的源码吧：
/** * Implement this method to handle touch screen motion events. * <p> * If this method is used to detect click actions, it is recommended that * the actions be performed by implementing and calling * {@link #performClick()}. This will ensure consistent system behavior, * including: * <ul> * <li>obeying click sound preferences * <li>dispatching OnClickListener calls * <li>handling {@link AccessibilityNodeInfo#ACTION_CLICK ACTION_CLICK} when * accessibility features are enabled * </ul> * * @param event The motion event. * @return True if the event was handled, false otherwise. */ public boolean onTouchEvent(MotionEvent event) { final float x = event.getX(); final float y = event.getY(); final int viewFlags = mViewFlags; final int action = event.getAction(); if ((viewFlags & ENABLED_MASK) == DISABLED) { if (action == MotionEvent.ACTION_UP && (mPrivateFlags & PFLAG_PRESSED) != 0) { setPressed(false); } // A disabled view that is clickable still consumes the touch // events, it just doesn't respond to them. return (((viewFlags & CLICKABLE) == CLICKABLE || (viewFlags & LONG_CLICKABLE) == LONG_CLICKABLE) || (viewFlags & CONTEXT_CLICKABLE) == CONTEXT_CLICKABLE); } if (mTouchDelegate != null) { if (mTouchDelegate.onTouchEvent(event)) { return true; } } if (((viewFlags & CLICKABLE) == CLICKABLE || (viewFlags & LONG_CLICKABLE) == LONG_CLICKABLE) || (viewFlags & CONTEXT_CLICKABLE) == CONTEXT_CLICKABLE) { switch (action) { case MotionEvent.ACTION_UP: boolean prepressed = (mPrivateFlags & PFLAG_PREPRESSED) != 0; if ((mPrivateFlags & PFLAG_PRESSED) != 0 || prepressed) { // take focus if we don't have it already and we should in // touch mode. boolean focusTaken = false; if (isFocusable() && isFocusableInTouchMode() && !isFocused()) { focusTaken = requestFocus(); } if (prepressed) { // The button is being released before we actually // showed it as pressed. Make it show the pressed // state now (before scheduling the click) to ensure // the user sees it. setPressed(true, x, y); } if (!mHasPerformedLongPress && !mIgnoreNextUpEvent) { // This is a tap, so remove the longpress check removeLongPressCallback(); // Only perform take click actions if we were in the pressed state if (!focusTaken) { // Use a Runnable and post this rather than calling // performClick directly. This lets other visual state // of the view update before click actions start. if (mPerformClick == null) { mPerformClick = new PerformClick(); } if (!post(mPerformClick)) { performClick(); } } } if (mUnsetPressedState == null) { mUnsetPressedState = new UnsetPressedState(); } if (prepressed) { postDelayed(mUnsetPressedState, ViewConfiguration.getPressedStateDuration()); } else if (!post(mUnsetPressedState)) { // If the post failed, unpress right now mUnsetPressedState.run(); } removeTapCallback(); } mIgnoreNextUpEvent = false; break; case MotionEvent.ACTION_DOWN: mHasPerformedLongPress = false; if (performButtonActionOnTouchDown(event)) { break; } // Walk up the hierarchy to determine if we're inside a scrolling container. boolean isInScrollingContainer = isInScrollingContainer(); // For views inside a scrolling container, delay the pressed feedback for // a short period in case this is a scroll. if (isInScrollingContainer) { mPrivateFlags |= PFLAG_PREPRESSED; if (mPendingCheckForTap == null) { mPendingCheckForTap = new CheckForTap(); } mPendingCheckForTap.x = event.getX(); mPendingCheckForTap.y = event.getY(); postDelayed(mPendingCheckForTap, ViewConfiguration.getTapTimeout()); } else { // Not inside a scrolling container, so show the feedback right away setPressed(true, x, y); checkForLongClick(0); } break; case MotionEvent.ACTION_CANCEL: setPressed(false); removeTapCallback(); removeLongPressCallback(); mInContextButtonPress = false; mHasPerformedLongPress = false; mIgnoreNextUpEvent = false; break; case MotionEvent.ACTION_MOVE: drawableHotspotChanged(x, y); // Be lenient about moving outside of buttons if (!pointInView(x, y, mTouchSlop)) { // Outside button removeTapCallback(); if ((mPrivateFlags & PFLAG_PRESSED) != 0) { // Remove any future long press/tap checks removeLongPressCallback(); setPressed(false); } } break; } return true; } return false; }
这段源码比 dispatchTouchEvent 的还要长，不过同样我们挑重点的看：
if (((viewFlags & CLICKABLE) == CLICKABLE || (viewFlags & LONG_CLICKABLE) == LONG_CLICKABLE) || (viewFlags & CONTEXT_CLICKABLE) == CONTEXT_CLICKABLE)
看到这句话就大概知道了主要是判断该view是否是可点击的，如果可以点击则接着执行，否则直接返回false。可以看到if里面用switch来判断是哪种触摸事件，但在最后都是返回true的。
还有一点要注意：在 ACTION_UP 中会执行 performClick() 方法：
public boolean performClick() { final boolean result; final ListenerInfo li = mListenerInfo; if (li != null && li.mOnClickListener != null) { playSoundEffect(SoundEffectConstants.CLICK); li.mOnClickListener.onClick(this); result = true; } else { result = false; } sendAccessibilityEvent(AccessibilityEvent.TYPE_VIEW_CLICKED); return result; }
可以看到上面的li.mOnClickListener.onClick(this); ，没错，我们好像又有了新的发现。根据上面的经验，这句代码会去回调我们设置好的点击事件监听器。也就是我们平常用的xxx.setOnClickListener(listener);
/** * Register a callback to be invoked when this view is clicked. If this view is not * clickable, it becomes clickable. * * @param l The callback that will run * * @see #setClickable(boolean) */ public void setOnClickListener(@Nullable OnClickListener l) { if (!isClickable()) { setClickable(true); } getListenerInfo().mOnClickListener = l; }
我们可以看到上面方法设置正是mListenerInfo的点击监听器，验证了上面的猜想。到了这里onTouch事件的传递机制基本已经分析完成了,也算是告一段落了。
好了，这下我们可以解决开头的问题了，顺便我们再来小结一下：在dispatchTouchEvent中，如果设置了OnTouchListener并且View是enable的，那么首先被执行的是OnTouchListener中的onTouch(View v, MotionEvent event) 。若onTouch返回true,则dispatchTouchEvent不再往下执行并且返回true；不然会执行onTouchEvent，在onTouchEvent中若View是可点击的，则返回true，不然为false。还有在onTouchEvent中若View是可点击以及当前触摸事件为ACTION_UP，会执行performClick() ，回调OnClickListener的onClick方法。
下面是我画的一张草图：
还有一点值得注意的地方是：假如当前事件是ACTION_DOWN，只有dispatchTouchEvent返回true了之后该View才会接收到接下来的ACTION_MOVE,ACTION_UP事件，也就是说只有事件被消费了才能接收接下来的事件。
总结
以上就是关于Android中onTouch事件传递机制的详细分析，希望对各位Android开发者们的学习或者工作能有一定的帮助，如果有疑问大家可以留言交流。