问题描述

linux sparc 架构PCI设备能找到设备，但无法分配可用资源。

[    0.000000] ###INFO: ***************Welcom to MyKernel***************
[    0.000000] ###INFO: Build on Sep  5 2014, 04:56:28
[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 1.0.0                            2013/06/08 09:37'
[    0.000000] PROMLIB: Root node compatible: sun4v
[    0.000000] Linux version 2.6.32.20 (root@localhost.localdomain) (gcc version 4.4.3 20100121 (Red Hat 4.4.3-3) (GCC) ) #8 SMP Fri Sep 5 04:56:43 CST 2014
[    0.000000] bootconsole [btext0] enabled
[    0.000000] ARCH: SUN4V
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /pci@0/pci@0/display@0
[    0.000000] PROM: Built device tree with 151492 bytes of memory.
[    0.000000] MDESC: Size is 34720 bytes.
[    0.000000] PLATFORM: banner-name [YH FT-1000 Platform]
[    0.000000] PLATFORM: name [YH FT-1000 Platform]
[    0.000000] PLATFORM: hostid [83f9edf0]
[    0.000000] PLATFORM: serial# [00ab4130]
[    0.000000] PLATFORM: stick-frequency [3b9aca00]
[    0.000000] PLATFORM: mac-address [144ff9edf0]
[    0.000000] PLATFORM: watchdog-resolution [1000 ms]
[    0.000000] PLATFORM: watchdog-max-timeout [31536000000 ms]
[    0.000000] PLATFORM: max-cpus [256]
[    0.000000] Top of RAM: 0xff82e000, Total RAM: 0xfb3c6000
[    0.000000] Memory hole size: 68MB
[    0.000000] [0000010000000000-fffff80005000000] page_structs=131072 node=0 entry=0/0
[    0.000000] [0000010000000000-fffff80005400000] page_structs=131072 node=0 entry=1/0
[    0.000000] [0000010000800000-fffff80005800000] page_structs=131072 node=0 entry=2/0
[    0.000000] [0000010000800000-fffff80005c00000] page_structs=131072 node=0 entry=3/0
[    0.000000] [0000010001000000-fffff80006000000] page_structs=131072 node=0 entry=4/0
[    0.000000] [0000010001000000-fffff80006400000] page_structs=131072 node=0 entry=5/0
[    0.000000] [0000010001800000-fffff80006800000] page_structs=131072 node=0 entry=6/0
[    0.000000] [0000010001800000-fffff80006c00000] page_structs=131072 node=0 entry=7/0
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00002200 -> 0x0007fc17
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00002200 -> 0x0007fbd2
[    0.000000]     0: 0x0007fbd8 -> 0x0007fbe8
[    0.000000]     0: 0x0007fc16 -> 0x0007fc17
[    0.000000] On node 0 totalpages: 514531
[    0.000000]   Normal zone: 4021 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 510510 pages, LIFO batch:15
[    0.000000] Booting Linux...
[    0.000000] PERCPU: Embedded 7 pages/cpu @fffff80007000000 s25920 r8192 d23232 u65536
[    0.000000] pcpu-alloc: s25920 r8192 d23232 u65536 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 510510
[    0.000000] Kernel command line: root=/dev/mapper/VolGroup-lv_root ro LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet selinux=0
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes)
[    0.000000] Memory: 4048080k available (4048k kernel code, 2832k data, 232k init) [fffff80000000000,00000000ff82e000]
[    0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[10000] shift[16]
[    0.000000] clockevent: mult[80000000] shift[31]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[   40.725938] Calibrating delay using timer specific routine.. 2002.12 BogoMIPS (lpj=10010649)
[   40.726151] Mount-cache hash table entries: 512
[   40.742607] Brought up 32 CPUs
[   40.748046] ldc.c:v1.1 (July 22, 2008)
[   40.749322] NET: Registered protocol family 16
[   40.781504] VIO: Adding device channel-devices, parent = NO
[   40.784457] FeiTeng board init
[   40.784515] the processor type:FT1000a, board:ft1000a_gw,FT USER VERSION: |渄??-#M7+酾h
[   40.784900] Testing NMI watchdog ... OK.
[   40.984975] Performance events: Supported PMU type is 'FT'
[   41.001527] pci_sun4v: Registered hvapi major[1] minor[0]
[   41.001913] /pci@0: SUN4V PCI Bus Module
[   41.001928] /pci@0: On NUMA node -1
[   41.001944] /pci@0: PCI IO[c810000000] MEM[ca00000000]
[   41.062546] /pci@0: Imported 19 TSB entries from OBP
[   41.064105] /pci@0: MSI Queue first[0] num[36] count[128] devino[0x18]
[   41.064125] /pci@0: MSI first[0] num[256] mask[0xff] width[32]
[   41.064143] /pci@0: MSI addr32[0x7fff0000:0x10000] addr64[0x3ffff0000:0x10000]
[   41.064160] /pci@0: MSI queues at RA [00000000fab00000]
[   41.064179] PCI: Scanning PBM /pci@0
[   41.064592] PCI: scan_bus[/pci@0] bus no 0
[   41.064607]   * /pci@0/pci@0
[   41.064688]     create device, devfn: 0, type: pciex
[   41.064737]     class: 0x60400 device name: 0000:00:00.0
[   41.064757]     parse addresses (20 bytes) @ fffff800ff7bab40
[   41.064774]   start: ca00100000, end: ca0010ffff, i: 38
[   41.064786]     adding to system ...
[   41.064831] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.064872] pci 0000:00:00.0: supports D1
[   41.064889] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[   41.064908] pci 0000:00:00.0: PME# disabled
[   41.064929] PCI: dev header type: 1
[   41.064940] of_scan_pci_bridge(/pci@0/pci@0)
[   41.064966]     bus name: PCI Bus 0000:01
[   41.064979] PCI: scan_bus[/pci@0/pci@0] bus no 1
[   41.064992]   * /pci@0/pci@0/display@0
[   41.065042]     create device, devfn: 0, type: display
[   41.065089]     class: 0x30000 device name: 0000:01:00.0
[   41.065106]     parse addresses (80 bytes) @ fffff800ff7b9680
[   41.065123]   start: ca10000000, end: ca1fffffff, i: 10
[   41.065138]   start: ca00200000, end: ca0021ffff, i: 18
[   41.065153]   start: c810001000, end: c8100010ff, i: 20
[   41.065168]   start: ca00220000, end: ca0023ffff, i: 30
[   41.065180]     adding to system ...
[   41.065212] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.065261] pci 0000:01:00.0: supports D1 D2
[   41.065288] PCI: dev header type: 0
[   41.065300]   * /pci@0/pci@1
[   41.065349]     create device, devfn: 8, type: pciex
[   41.065391]     class: 0x60400 device name: 0000:00:01.0
[   41.065412]     parse addresses (20 bytes) @ fffff800ff7b8800
[   41.065428]   start: ca00110000, end: ca0011ffff, i: 38
[   41.065442]     adding to system ...
[   41.065472] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.065509] pci 0000:00:01.0: supports D1
[   41.065524] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[   41.065542] pci 0000:00:01.0: PME# disabled
[   41.065562] PCI: dev header type: 1
[   41.065572] of_scan_pci_bridge(/pci@0/pci@1)
[   41.065596]     bus name: PCI Bus 0000:02
[   41.065609] PCI: scan_bus[/pci@0/pci@1] bus no 2
[   41.065622]   * /pci@0/pci@1/pci@0
[   41.065672]     create device, devfn: 0, type: pciex
[   41.065721]     class: 0x60400 device name: 0000:02:00.0
[   41.065738]     parse addresses (20 bytes) @ fffff800ff7b7800
[   41.065754]   start: ca20000000, end: ca2001ffff, i: 10
[   41.065766]     adding to system ...
[   41.065796] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.065858] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[   41.065877] pci 0000:02:00.0: PME# disabled
[   41.065909] PCI: dev header type: 1
[   41.065920] of_scan_pci_bridge(/pci@0/pci@1/pci@0)
[   41.065945]     bus name: PCI Bus 0000:03
[   41.065958] PCI: scan_bus[/pci@0/pci@1/pci@0] bus no 3
[   41.065971]   * /pci@0/pci@1/pci@0/pci@1
[   41.066022]     create device, devfn: 8, type: pciex
[   41.066071]     class: 0x60400 device name: 0000:03:01.0
[   41.066086]     adding to system ...
[   41.066116] pci 0000:03:01.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.066178] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
[   41.066197] pci 0000:03:01.0: PME# disabled
[   41.066229] PCI: dev header type: 1
[   41.066241] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@1)
[   41.066268]     bus name: PCI Bus 0000:04
[   41.066281] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@1] bus no 4
[   41.066295]   * /pci@0/pci@1/pci@0/pci@1/ethernet@0
[   41.066348]     create device, devfn: 0, type:
[   41.066399]     class: 0x20000 device name: 0000:04:00.0
[   41.066417]     parse addresses (80 bytes) @ fffff800ff7b5740
[   41.066435]   start: ca20100000, end: ca2011ffff, i: 10
[   41.066450]   start: ca20120000, end: ca2013ffff, i: 14
[   41.066467]   start: c810002000, end: c81000201f, i: 18
[   41.066482]   start: ca20140000, end: ca2015ffff, i: 30
[   41.066494]     adding to system ...
[   41.066525] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.066592] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[   41.066612] pci 0000:04:00.0: PME# disabled
[   41.066643] PCI: dev header type: 0
[   41.066655]   * /pci@0/pci@1/pci@0/pci@1/ethernet@0,1
[   41.066709]     create device, devfn: 1, type:
[   41.066760]     class: 0x20000 device name: 0000:04:00.1
[   41.066777]     parse addresses (80 bytes) @ fffff800ff7b4a80
[   41.066793]   start: ca20160000, end: ca2017ffff, i: 10
[   41.066809]   start: ca20180000, end: ca2019ffff, i: 14
[   41.066824]   start: c810002020, end: c81000203f, i: 18
[   41.066839]   start: ca201a0000, end: ca201bffff, i: 30
[   41.066851]     adding to system ...
[   41.066881] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x1a4
[   41.066948] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[   41.066967] pci 0000:04:00.1: PME# disabled
[   41.066999] PCI: dev header type: 0
[   41.067011]   * /pci@0/pci@1/pci@0/pci@4
[   41.067063]     create device, devfn: 20, type: pciex
[   41.067113]     class: 0x60400 device name: 0000:03:04.0
[   41.067127]     adding to system ...
[   41.067157] pci 0000:03:04.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.067219] pci 0000:03:04.0: PME# supported from D0 D3hot D3cold
[   41.067238] pci 0000:03:04.0: PME# disabled
[   41.067270] PCI: dev header type: 1
[   41.067281] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4)
[   41.067306]     bus name: PCI Bus 0000:05
[   41.067319] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4] bus no 5
[   41.067334]   * /pci@0/pci@1/pci@0/pci@4/pci@0
[   41.067387]     create device, devfn: 0, type: pciex
[   41.067439]     class: 0x60400 device name: 0000:05:00.0
[   41.067455]     parse addresses (20 bytes) @ fffff800ff7b2d40
[   41.067473]   start: ca20200000, end: ca2021ffff, i: 10
[   41.067485]     adding to system ...
[   41.067517] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.067586] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[   41.067606] pci 0000:05:00.0: PME# disabled
[   41.067640] PCI: dev header type: 1
[   41.067651] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0)
[   41.067677]     bus name: PCI Bus 0000:06
[   41.067690] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0] bus no 6
[   41.067705]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@1
[   41.067760]     create device, devfn: 8, type: pciex
[   41.067812]     class: 0x60400 device name: 0000:06:01.0
[   41.067826]     adding to system ...
[   41.067856] pci 0000:06:01.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.067924] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[   41.067943] pci 0000:06:01.0: PME# disabled
[   41.067978] PCI: dev header type: 1
[   41.067989] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@1)
[   41.068015]     bus name: PCI Bus 0000:07
[   41.068029] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@1] bus no 7
[   41.068045]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@3
[   41.068100]     create device, devfn: 18, type: pciex
[   41.068153]     class: 0x60400 device name: 0000:06:03.0
[   41.068167]     adding to system ...
[   41.068197] pci 0000:06:03.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.068265] pci 0000:06:03.0: PME# supported from D0 D3hot D3cold
[   41.068285] pci 0000:06:03.0: PME# disabled
[   41.068319] PCI: dev header type: 1
[   41.068330] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@3)
[   41.068357]     bus name: PCI Bus 0000:08
[   41.068370] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@3] bus no 8
[   41.068387]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@a
[   41.068442]     create device, devfn: 50, type: pciex
[   41.068494]     class: 0x60400 device name: 0000:06:0a.0
[   41.068508]     adding to system ...
[   41.068539] pci 0000:06:0a.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.068610] pci 0000:06:0a.0: PME# supported from D0 D3hot D3cold
[   41.068631] pci 0000:06:0a.0: PME# disabled
[   41.068666] PCI: dev header type: 1
[   41.068678] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@a)
[   41.068703]     bus name: PCI Bus 0000:09
[   41.068717] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@a] bus no 9
[   41.068733]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b
[   41.068789]     create device, devfn: 58, type: pciex
[   41.068842]     class: 0x60400 device name: 0000:06:0b.0
[   41.068856]     adding to system ...
[   41.068886] pci 0000:06:0b.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.068954] pci 0000:06:0b.0: PME# supported from D0 D3hot D3cold
[   41.068974] pci 0000:06:0b.0: PME# disabled
[   41.069008] PCI: dev header type: 1
[   41.069019] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@b)
[   41.069046]     bus name: PCI Bus 0000:0a
[   41.069059] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@b] bus no 10
[   41.069075]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0
[   41.069132]     create device, devfn: 0, type: ohci
[   41.069192]     class: 0xc0310 device name: 0000:0a:00.0
[   41.069209]     parse addresses (20 bytes) @ fffff800ff7a1dc0
[   41.069225]   start: ca20300000, end: ca20301fff, i: 10
[   41.069237]     adding to system ...
[   41.069263] pci 0000:0a:00.0: calling quirk_netmos+0x0/0x104
[   41.069291] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.069375] pci 0000:0a:00.0: supports D1 D2
[   41.069391] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   41.069412] pci 0000:0a:00.0: PME# disabled
[   41.069449] PCI: dev header type: 0
[   41.069461]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,1
[   41.069521]     create device, devfn: 1, type: ehci
[   41.069582]     class: 0xc0320 device name: 0000:0a:00.1
[   41.069603]     parse addresses (20 bytes) @ fffff800ff79e740
[   41.069621]   start: ca20302000, end: ca20303fff, i: 10
[   41.069633]     adding to system ...
[   41.069658] pci 0000:0a:00.1: calling quirk_netmos+0x0/0x104
[   41.069686] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x1a4
[   41.069770] pci 0000:0a:00.1: supports D1 D2
[   41.069787] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[   41.069807] pci 0000:0a:00.1: PME# disabled
[   41.069844] PCI: dev header type: 0
[   41.069856]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,2
[   41.069915]     create device, devfn: 2, type: ohci
[   41.069976]     class: 0xc0310 device name: 0000:0a:00.2
[   41.069993]     parse addresses (20 bytes) @ fffff800ff79d980
[   41.070009]   start: ca20304000, end: ca20305fff, i: 10
[   41.070021]     adding to system ...
[   41.070047] pci 0000:0a:00.2: calling quirk_netmos+0x0/0x104
[   41.070075] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x1a4
[   41.070159] pci 0000:0a:00.2: supports D1 D2
[   41.070175] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[   41.070195] pci 0000:0a:00.2: PME# disabled
[   41.070233] PCI: dev header type: 0
[   41.070245]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,3
[   41.070304]     create device, devfn: 3, type: ehci
[   41.070365]     class: 0xc0320 device name: 0000:0a:00.3
[   41.070382]     parse addresses (20 bytes) @ fffff800ff79cbc0
[   41.070398]   start: ca20306000, end: ca20307fff, i: 10
[   41.070410]     adding to system ...
[   41.070435] pci 0000:0a:00.3: calling quirk_netmos+0x0/0x104
[   41.070463] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x1a4
[   41.070547] pci 0000:0a:00.3: supports D1 D2
[   41.070563] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[   41.070583] pci 0000:0a:00.3: PME# disabled
[   41.070620] PCI: dev header type: 0
[   41.070634]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,4
[   41.070700]     create device, devfn: 4, type: ohci
[   41.070761]     class: 0xc0310 device name: 0000:0a:00.4
[   41.070777]     parse addresses (20 bytes) @ fffff800ff79be00
[   41.070793]   start: ca20308000, end: ca20309fff, i: 10
[   41.070805]     adding to system ...
[   41.070831] pci 0000:0a:00.4: calling quirk_netmos+0x0/0x104
[   41.070859] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x1a4
[   41.070943] pci 0000:0a:00.4: supports D1 D2
[   41.070959] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[   41.070979] pci 0000:0a:00.4: PME# disabled
[   41.071016] PCI: dev header type: 0
[   41.071028]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,5
[   41.071089]     create device, devfn: 5, type: ehci
[   41.071150]     class: 0xc0320 device name: 0000:0a:00.5
[   41.071167]     parse addresses (20 bytes) @ fffff800ff79b040
[   41.071183]   start: ca2030a000, end: ca2030bfff, i: 10
[   41.071195]     adding to system ...
[   41.071220] pci 0000:0a:00.5: calling quirk_netmos+0x0/0x104
[   41.071248] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x1a4
[   41.071332] pci 0000:0a:00.5: supports D1 D2
[   41.071348] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[   41.071369] pci 0000:0a:00.5: PME# disabled
[   41.071406] PCI: dev header type: 0
[   41.071418]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,6
[   41.071481]     create device, devfn: 6, type: ohci
[   41.071542]     class: 0xc0310 device name: 0000:0a:00.6
[   41.071559]     parse addresses (20 bytes) @ fffff800ff798a40
[   41.071575]   start: ca2030c000, end: ca2030dfff, i: 10
[   41.071587]     adding to system ...
[   41.071612] pci 0000:0a:00.6: calling quirk_netmos+0x0/0x104
[   41.071640] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x1a4
[   41.071726] pci 0000:0a:00.6: supports D1 D2
[   41.071744] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot D3cold
[   41.071766] pci 0000:0a:00.6: PME# disabled
[   41.071803] PCI: dev header type: 0
[   41.071815]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,7
[   41.071878]     create device, devfn: 7, type: ehci
[   41.071957]     class: 0xc0320 device name: 0000:0a:00.7
[   41.071975]     parse addresses (20 bytes) @ fffff800ff797c80
[   41.071991]   start: ca2030e000, end: ca2030ffff, i: 10
[   41.072003]     adding to system ...
[   41.072029] pci 0000:0a:00.7: calling quirk_netmos+0x0/0x104
[   41.072057] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x1a4
[   41.072141] pci 0000:0a:00.7: supports D1 D2
[   41.072157] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot D3cold
[   41.072178] pci 0000:0a:00.7: PME# disabled
[   41.072215] PCI: dev header type: 0
[   41.072227]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@c
[   41.072291]     create device, devfn: 60, type: pciex
[   41.072343]     class: 0x60400 device name: 0000:06:0c.0
[   41.072358]     adding to system ...
[   41.072389] pci 0000:06:0c.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.072459] pci 0000:06:0c.0: PME# supported from D0 D3hot D3cold
[   41.072479] pci 0000:06:0c.0: PME# disabled
[   41.072514] PCI: dev header type: 1
[   41.072525] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@c)
[   41.072553]     bus name: PCI Bus 0000:0b
[   41.072566] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@c] bus no 11
[   41.072583]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@d
[   41.072647]     create device, devfn: 68, type: pciex
[   41.072700]     class: 0x60400 device name: 0000:06:0d.0
[   41.072714]     adding to system ...
[   41.072751] pci 0000:06:0d.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.072819] pci 0000:06:0d.0: PME# supported from D0 D3hot D3cold
[   41.072840] pci 0000:06:0d.0: PME# disabled
[   41.072876] PCI: dev header type: 1
[   41.072888] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@d)
[   41.072915]     bus name: PCI Bus 0000:0c
[   41.072929] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@d] bus no 12
[   41.072945]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@e
[   41.073010]     create device, devfn: 70, type: pciex
[   41.073063]     class: 0x60400 device name: 0000:06:0e.0
[   41.073077]     adding to system ...
[   41.073107] pci 0000:06:0e.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.073176] pci 0000:06:0e.0: PME# supported from D0 D3hot D3cold
[   41.073196] pci 0000:06:0e.0: PME# disabled
[   41.073230] PCI: dev header type: 1
[   41.073242] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@e)
[   41.073268]     bus name: PCI Bus 0000:0d
[   41.073282] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@e] bus no 13
[   41.073298]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@f
[   41.073365]     create device, devfn: 78, type: pciex
[   41.073419]     class: 0x60400 device name: 0000:06:0f.0
[   41.073433]     adding to system ...
[   41.073464] pci 0000:06:0f.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.073532] pci 0000:06:0f.0: PME# supported from D0 D3hot D3cold
[   41.073551] pci 0000:06:0f.0: PME# disabled
[   41.073586] PCI: dev header type: 1
[   41.073598] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@f)
[   41.073624]     bus name: PCI Bus 0000:0e
[   41.073638] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@f] bus no 14
[   41.073654]   * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@2
[   41.073720]     create device, devfn: 10, type: pciex
[   41.073772]     class: 0x60400 device name: 0000:06:02.0
[   41.073788]     adding to system ...
[   41.073823] pci 0000:06:02.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.073892] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[   41.073912] pci 0000:06:02.0: PME# disabled
[   41.073946] PCI: dev header type: 1
[   41.073958] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@2)
[   41.073985]     bus name: PCI Bus 0000:0f
[   41.073998] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@2] bus no 15
[   41.074015]   * /pci@0/pci@1/pci@0/pci@4/pciex10b5,8619@0,1
[   41.074082]     create device, devfn: 1, type:
[   41.074133]     class: 0x88000 device name: 0000:05:00.1
[   41.074150]     parse addresses (20 bytes) @ fffff800ff792040
[   41.074166]   start: ca20220000, end: ca2023ffff, i: 10
[   41.074178]     adding to system ...
[   41.074208] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x1a4
[   41.074296] PCI: dev header type: 0
[   41.074309]   * /pci@0/pci@1/pci@0/pci@5
[   41.074375]     create device, devfn: 28, type: pciex
[   41.074425]     class: 0x60400 device name: 0000:03:05.0
[   41.074440]     adding to system ...
[   41.074470] pci 0000:03:05.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.074533] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
[   41.074552] pci 0000:03:05.0: PME# disabled
[   41.074584] PCI: dev header type: 1
[   41.074595] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@5)
[   41.074620]     bus name: PCI Bus 0000:10
[   41.074633] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@5] bus no 16
[   41.074648]   * /pci@0/pci@1/pci@0/pci@5/pci@0
[   41.074714]     create device, devfn: 0, type: pciex
[   41.074773]     class: 0x60400 device name: 0000:10:00.0
[   41.074788]     adding to system ...
[   41.074818] pci 0000:10:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.074886] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[   41.074906] pci 0000:10:00.0: PME# disabled
[   41.074948] PCI: dev header type: 1
[   41.074959] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@5/pci@0)
[   41.074993]     bus name: PCI Bus 0000:11
[   41.075007] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@5/pci@0] bus no 17
[   41.075023]   * /pci@0/pci@1/pci@0/pci@5/pci@0/interrupt-controller@8
[   41.075094]     create device, devfn: 40, type:
[   41.075134]     class: 0x80000 device name: 0000:11:08.0
[   41.075151]     parse addresses (20 bytes) @ fffff800ff78f540
[   41.075167]   start: 0, end: 0, i: 10
[   41.075177]     adding to system ...
[   41.075207] pci 0000:11:08.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.075237] PCI: dev header type: 0
[   41.075250]   * /pci@0/pci@1/pci@0/pci@6
[   41.075318]     create device, devfn: 30, type: pciex
[   41.075368]     class: 0x60400 device name: 0000:03:06.0
[   41.075383]     adding to system ...
[   41.075413] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.075475] pci 0000:03:06.0: PME# supported from D0 D3hot D3cold
[   41.075494] pci 0000:03:06.0: PME# disabled
[   41.075526] PCI: dev header type: 1
[   41.075537] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@6)
[   41.075562]     bus name: PCI Bus 0000:12
[   41.075575] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@6] bus no 18
[   41.075590]   * /pci@0/pci@1/pci@0/pci@7
[   41.075657]     create device, devfn: 38, type: pciex
[   41.075706]     class: 0x60400 device name: 0000:03:07.0
[   41.075720]     adding to system ...
[   41.075751] pci 0000:03:07.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.075813] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
[   41.075832] pci 0000:03:07.0: PME# disabled
[   41.075864] PCI: dev header type: 1
[   41.075877] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@7)
[   41.075906]     bus name: PCI Bus 0000:13
[   41.075920] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@7] bus no 19
[   41.075934]   * /pci@0/pci@1/pci@0/pci@8
[   41.076009]     create device, devfn: 40, type: pciex
[   41.076060]     class: 0x60400 device name: 0000:03:08.0
[   41.076074]     adding to system ...
[   41.076104] pci 0000:03:08.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.076167] pci 0000:03:08.0: PME# supported from D0 D3hot D3cold
[   41.076186] pci 0000:03:08.0: PME# disabled
[   41.076218] PCI: dev header type: 1
[   41.076229] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@8)
[   41.076254]     bus name: PCI Bus 0000:14
[   41.076267] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@8] bus no 20
[   41.076282]   * /pci@0/pci@1/pci@0/pci@9
[   41.076350]     create device, devfn: 48, type: pciex
[   41.076400]     class: 0x60400 device name: 0000:03:09.0
[   41.076414]     adding to system ...
[   41.076444] pci 0000:03:09.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.076507] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
[   41.076525] pci 0000:03:09.0: PME# disabled
[   41.076557] PCI: dev header type: 1
[   41.076568] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@9)
[   41.076593]     bus name: PCI Bus 0000:15
[   41.076606] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@9] bus no 21
[   41.076621]   * /pci@0/pci@1/pci@0/pci@a
[   41.076689]     create device, devfn: 50, type: pciex
[   41.076739]     class: 0x60400 device name: 0000:03:0a.0
[   41.076753]     adding to system ...
[   41.076783] pci 0000:03:0a.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.076846] pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
[   41.076865] pci 0000:03:0a.0: PME# disabled
[   41.076897] PCI: dev header type: 1
[   41.076908] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@a)
[   41.076936]     bus name: PCI Bus 0000:16
[   41.076950] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@a] bus no 22
[   41.076964]   * /pci@0/pci@1/pci@0/pci@2
[   41.077033]     create device, devfn: 10, type: pciex
[   41.077084]     class: 0x60400 device name: 0000:03:02.0
[   41.077098]     adding to system ...
[   41.077128] pci 0000:03:02.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.077190] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[   41.077209] pci 0000:03:02.0: PME# disabled
[   41.077241] PCI: dev header type: 1
[   41.077252] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@2)
[   41.077277]     bus name: PCI Bus 0000:17
[   41.077290] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@2] bus no 23
[   41.077305]   * /pci@0/pci@1/pci@0/pci@2/ethernet@0
[   41.077377]     create device, devfn: 0, type:
[   41.077429]     class: 0x20000 device name: 0000:17:00.0
[   41.077445]     parse addresses (80 bytes) @ fffff800ff788680
[   41.077462]   start: ca20400000, end: ca2041ffff, i: 10
[   41.077477]   start: ca20420000, end: ca2043ffff, i: 14
[   41.077492]   start: c810003000, end: c81000301f, i: 18
[   41.077507]   start: ca20440000, end: ca2045ffff, i: 30
[   41.077519]     adding to system ...
[   41.077550] pci 0000:17:00.0: calling quirk_resource_alignment+0x0/0x1a4
[   41.077617] pci 0000:17:00.0: PME# supported from D0 D3hot D3cold
[   41.077637] pci 0000:17:00.0: PME# disabled
[   41.077668] PCI: dev header type: 0
[   41.077680]   * /pci@0/pci@1/pci@0/pci@2/ethernet@0,1
[   41.077752]     create device, devfn: 1, type:
[   41.077804]     class: 0x20000 device name: 0000:17:00.1
[   41.077821]     parse addresses (80 bytes) @ fffff800ff7879c0
[   41.077837]   start: ca20460000, end: ca2047ffff, i: 10
[   41.077852]   start: ca20480000, end: ca2049ffff, i: 14
[   41.077867]   start: c810003020, end: c81000303f, i: 18
[   41.077882]   start: ca204a0000, end: ca204bffff, i: 30
[   41.077894]     adding to system ...
[   41.077925] pci 0000:17:00.1: calling quirk_resource_alignment+0x0/0x1a4
[   41.077993] pci 0000:17:00.1: PME# supported from D0 D3hot D3cold
[   41.078012] pci 0000:17:00.1: PME# disabled
[   41.078046] PCI: dev header type: 0
[   41.095901] /amba@400: SUN4V AMBA Bus Module
[   41.095916] /amba@400: On NUMA node -1
[   41.095928] /amba@400: Device Handle 0x400
[   41.095944] /amba@400: AMBA MEM [0x8a00000000 ~ 0x8dffffffff]
[   41.095965] /amba@400: Virtual DMA [0x80000000 ~ 0xffffffff]
[   41.155908] /amba@400: Imported 4 IOTSB entries from OBP
[   41.155927] AMBA: Scanning PBM /amba@400
[   41.155940]   * /amba@400/sata@8
[   41.155953]     periphid: 0x8
[   41.156054]     mem space: 0x8b01000000 ~ 8b01001fff
[   41.156067]     irq: 0x9
[   41.156426]   * /amba@400/sata@a
[   41.156440]     periphid: 0xa
[   41.156510]     mem space: 0x8c01000000 ~ 8c01001fff
[   41.156523]     irq: 0xa
[   41.156758]   * /amba@400/usb@d
[   41.156774]     periphid: 0xd
[   41.156844]     mem space: 0x8a00411000 ~ 8a004113ff
[   41.156857]     irq: 0xb
[   41.157083]   * /amba@400/usb@c
[   41.157098]     periphid: 0xc
[   41.157173]     mem space: 0x8a00410000 ~ 8a004103ff
[   41.157186]     irq: 0xc
[   41.157413]   * /amba@400/usb@f
[   41.157428]     periphid: 0xf
[   41.157502]     mem space: 0x8a00421000 ~ 8a004213ff
[   41.157515]     irq: 0xd
[   41.157749]   * /amba@400/usb@e
[   41.157764]     periphid: 0xe
[   41.157838]     mem space: 0x8a00420000 ~ 8a004203ff
[   41.157851]     irq: 0xe
[   41.158078]   * /amba@400/i2c@10
[   41.158093]     periphid: 0x10
[   41.158167]     mem space: 0x8a00400000 ~ 8a004003ff
[   41.158180]     irq: 0xf
[   41.158407]   * /amba@400/i2c@11
[   41.158421]     periphid: 0x11
[   41.158496]     mem space: 0x8a00400400 ~ 8a004007ff
[   41.158509]     irq: 0x10
[   41.158744]   * /amba@400/i2c@12
[   41.158759]     periphid: 0x12
[   41.158834]     mem space: 0x8a00400800 ~ 8a00400bff
[   41.158847]     irq: 0x11
[   41.159077]   * /amba@400/i2c@13
[   41.159091]     periphid: 0x13
[   41.159167]     mem space: 0x8a00400c00 ~ 8a00400fff
[   41.159180]     irq: 0x12
[   41.159410]   * /amba@400/i2s@14
[   41.159424]     periphid: 0x14
[   41.159500]     mem space: 0x8a00401000 ~ 8a004013ff
[   41.159513]     irq: 0x13
[   41.159745]   * /amba@400/i2s@15
[   41.159763]     periphid: 0x15
[   41.159839]     mem space: 0x8a00401400 ~ 8a004017ff
[   41.159852]     irq: 0x14
[   41.160093]   * /amba@400/i2s@16
[   41.160107]     periphid: 0x16
[   41.160184]     mem space: 0x8a00401800 ~ 8a00401bff
[   41.160198]     irq: 0x15
[   41.160426]   * /amba@400/i2s@17
[   41.160440]     periphid: 0x17
[   41.160518]     mem space: 0x8a00401c00 ~ 8a00401fff
[   41.160531]     irq: 0x16
[   41.160761]   * /amba@400/console@18
[   41.160776]     periphid: 0x18
[   41.160859]     mem space: 0x8a00402000 ~ 8a004023ff
[   41.160872]     irq: 0x17
[   41.161103]   * /amba@400/console@19
[   41.161117]     periphid: 0x19
[   41.161196]     mem space: 0x8a00402400 ~ 8a004027ff
[   41.161209]     irq: 0x18
[   41.161439]   * /amba@400/gpio@1a
[   41.161453]     periphid: 0x1a
[   41.161533]     mem space: 0x8a00402800 ~ 8a00402bff
[   41.161546]     irq: 0x19
[   41.162037]   * /amba@400/ictl@1b
[   41.162052]     periphid: 0x1b
[   41.162132]     mem space: 0x8a00402c00 ~ 8a00402fff
[   41.162145]     irq: 0x1a
[   41.162375]   * /amba@400/rtc@1c
[   41.162390]     periphid: 0x1c
[   41.162471]     mem space: 0x8a00403000 ~ 8a004033ff
[   41.162485]     irq: 0x1b
[   41.162716]   * /amba@400/watchdog@1d
[   41.162731]     periphid: 0x1d
[   41.162812]     mem space: 0x8a00403400 ~ 8a004037ff
[   41.162825]     irq: 0x1c
[   41.187831] bio: create slab <bio-0> at 0
[   41.192286] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[   41.192440] vgaarb: loaded
[   41.192451] vgaarb: bridge control possible 0000:01:00.0
[   41.193396] SCSI subsystem initialized
[   41.196468] libata version 3.00 loaded.
[   41.197521] usbcore: registered new interface driver usbfs
[   41.197755] usbcore: registered new interface driver hub
[   41.198064] usbcore: registered new device driver usb
[   41.200082] Switching to clocksource stick
[   41.217874] NET: Registered protocol family 2
[   41.218412] IP route cache hash table entries: 131072 (order: 7, 1048576 bytes)
[   41.221009] TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
[   41.250930] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[   41.255596] TCP: Hash tables configured (established 524288 bind 65536)
[   41.255615] TCP reno registered
[   41.257623] NET: Registered protocol family 1
[   41.257760] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.257803] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.257836] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.257865] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.257896] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.257925] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.257956] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.257984] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258015] pci 0000:03:01.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258044] pci 0000:03:01.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258075] pci 0000:03:04.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258104] pci 0000:03:04.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258135] pci 0000:03:05.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258163] pci 0000:03:05.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258194] pci 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258223] pci 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258254] pci 0000:03:07.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258283] pci 0000:03:07.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258315] pci 0000:03:08.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258344] pci 0000:03:08.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258378] pci 0000:03:09.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258407] pci 0000:03:09.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258437] pci 0000:03:0a.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258466] pci 0000:03:0a.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258496] pci 0000:03:02.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258525] pci 0000:03:02.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258557] pci 0000:04:00.0: calling quirk_e100_interrupt+0x0/0x1e8
[   41.258583] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258611] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258643] pci 0000:04:00.1: calling quirk_e100_interrupt+0x0/0x1e8
[   41.258668] pci 0000:04:00.1: calling quirk_cardbus_legacy+0x0/0x38
[   41.258696] pci 0000:04:00.1: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258727] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258756] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258787] pci 0000:05:00.1: calling quirk_cardbus_legacy+0x0/0x38
[   41.258815] pci 0000:05:00.1: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258846] pci 0000:06:01.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258875] pci 0000:06:01.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258905] pci 0000:06:03.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258934] pci 0000:06:03.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.258964] pci 0000:06:0a.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.258993] pci 0000:06:0a.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259024] pci 0000:06:0b.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259052] pci 0000:06:0b.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259083] pci 0000:06:0c.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259112] pci 0000:06:0c.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259143] pci 0000:06:0d.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259171] pci 0000:06:0d.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259202] pci 0000:06:0e.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259230] pci 0000:06:0e.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259261] pci 0000:06:0f.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259289] pci 0000:06:0f.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259320] pci 0000:06:02.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259349] pci 0000:06:02.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259385] pci 0000:0a:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259415] pci 0000:0a:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259458] pci 0000:0a:00.1: calling quirk_cardbus_legacy+0x0/0x38
[   41.259487] pci 0000:0a:00.1: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259522] pci 0000:0a:00.2: calling quirk_cardbus_legacy+0x0/0x38
[   41.259551] pci 0000:0a:00.2: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259588] pci 0000:0a:00.3: calling quirk_cardbus_legacy+0x0/0x38
[   41.259617] pci 0000:0a:00.3: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259652] pci 0000:0a:00.4: calling quirk_cardbus_legacy+0x0/0x38
[   41.259681] pci 0000:0a:00.4: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259719] pci 0000:0a:00.5: calling quirk_cardbus_legacy+0x0/0x38
[   41.259747] pci 0000:0a:00.5: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259782] pci 0000:0a:00.6: calling quirk_cardbus_legacy+0x0/0x38
[   41.259811] pci 0000:0a:00.6: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259849] pci 0000:0a:00.7: calling quirk_cardbus_legacy+0x0/0x38
[   41.259878] pci 0000:0a:00.7: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259912] pci 0000:10:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.259941] pci 0000:10:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.259972] pci 0000:11:08.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.260001] pci 0000:11:08.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.260033] pci 0000:17:00.0: calling quirk_e100_interrupt+0x0/0x1e8
[   41.260058] pci 0000:17:00.0: calling quirk_cardbus_legacy+0x0/0x38
[   41.260086] pci 0000:17:00.0: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.260119] pci 0000:17:00.1: calling quirk_e100_interrupt+0x0/0x1e8
[   41.260143] pci 0000:17:00.1: calling quirk_cardbus_legacy+0x0/0x38
[   41.260171] pci 0000:17:00.1: calling quirk_usb_early_handoff+0x0/0x5f0
[   41.260541] Unpacking initramfs...
[   43.105650] Freeing initrd memory: 14241k freed
[   43.124732] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[   43.128158] VFS: Disk quotas dquot_6.5.2
[   43.128378] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[   43.128956] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.129318] msgmni has been set to 7935
[   43.135109] alg: No test for stdrng (krng)
[   43.135431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   43.135454] io scheduler noop registered
[   43.135468] io scheduler anticipatory registered
[   43.135482] io scheduler deadline registered (default)
[   43.135521] io scheduler cfq registered
[   43.153792] f0298788: ttyS0 at I/O 0x0 (irq = 2) is a SUN4V HCONS
[   43.155022] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[   43.166368] loop: module loaded
[   43.172343] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[   43.172624] mpt2sas version 02.100.03.00 loaded
[   43.173155] osst :I: Tape driver with OnStream support version 0.99.4
[   43.173166] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   43.173988] SCSI Media Changer driver v0.25
[   43.177164] Fusion MPT base driver 3.04.12
[   43.177176] Copyright (c) 1999-2008 LSI Corporation
[   43.177218] Fusion MPT SPI Host driver 3.04.12
[   43.177472] Fusion MPT FC Host driver 3.04.12
[   43.177751] Fusion MPT SAS Host driver 3.04.12
[   43.178016] Fusion MPT misc device (ioctl) driver 3.04.12
[   43.178257] mptctl: Registered with Fusion MPT base driver
[   43.178278] mptctl: /dev/mptctl @ (major,minor=10,220)
[   43.178530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   43.178629] PCI: Enabling device: (0000:0a:00.1), cmd 2
[   43.178660] ehci_hcd 0000:0a:00.1: enabling bus mastering
[   43.178678] ehci_hcd 0000:0a:00.1: EHCI Host Controller
[   43.178718] ehci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 1
[   43.178870] ehci_hcd 0000:0a:00.1: Enabling legacy PCI PM
[   43.215396] ehci_hcd 0000:0a:00.1: enabling Mem-Wr-Inval
[   43.215469] ehci_hcd 0000:0a:00.1: irq 8, io mem 0xca20302000
[   43.233503] ehci_hcd 0000:0a:00.1: USB 2.0 started, EHCI 1.00
[   43.233623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   43.233644] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.233663] usb usb1: Product: EHCI Host Controller
[   43.233679] usb usb1: Manufacturer: Linux 2.6.32.20 ehci_hcd
[   43.233695] usb usb1: SerialNumber: 0000:0a:00.1
[   43.234123] usb usb1: configuration #1 chosen from 1 choice
[   43.234443] hub 1-0:1.0: USB hub found
[   43.234494] hub 1-0:1.0: 1 port detected
[   43.234697] PCI: Enabling device: (0000:0a:00.3), cmd 2
[   43.234722] ehci_hcd 0000:0a:00.3: enabling bus mastering
[   43.234739] ehci_hcd 0000:0a:00.3: EHCI Host Controller
[   43.234775] ehci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 2
[   43.234919] ehci_hcd 0000:0a:00.3: Enabling legacy PCI PM
[   43.263503] ehci_hcd 0000:0a:00.3: enabling Mem-Wr-Inval
[   43.263563] ehci_hcd 0000:0a:00.3: irq 5, io mem 0xca20306000
[   43.283512] ehci_hcd 0000:0a:00.3: USB 2.0 started, EHCI 1.00
[   43.283604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   43.283625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.283643] usb usb2: Product: EHCI Host Controller
[   43.283659] usb usb2: Manufacturer: Linux 2.6.32.20 ehci_hcd
[   43.283675] usb usb2: SerialNumber: 0000:0a:00.3
[   43.284070] usb usb2: configuration #1 chosen from 1 choice
[   43.284395] hub 2-0:1.0: USB hub found
[   43.284440] hub 2-0:1.0: 1 port detected
[   43.284630] PCI: Enabling device: (0000:0a:00.5), cmd 2
[   43.284655] ehci_hcd 0000:0a:00.5: enabling bus mastering
[   43.284672] ehci_hcd 0000:0a:00.5: EHCI Host Controller
[   43.284708] ehci_hcd 0000:0a:00.5: new USB bus registered, assigned bus number 3
[   43.284845] ehci_hcd 0000:0a:00.5: Enabling legacy PCI PM
[   43.313504] ehci_hcd 0000:0a:00.5: enabling Mem-Wr-Inval
[   43.313571] ehci_hcd 0000:0a:00.5: irq 6, io mem 0xca2030a000
[   43.333548] ehci_hcd 0000:0a:00.5: USB 2.0 started, EHCI 1.00
[   43.333640] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   43.333661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.333679] usb usb3: Product: EHCI Host Controller
[   43.333694] usb usb3: Manufacturer: Linux 2.6.32.20 ehci_hcd
[   43.333710] usb usb3: SerialNumber: 0000:0a:00.5
[   43.334103] usb usb3: configuration #1 chosen from 1 choice
[   43.334412] hub 3-0:1.0: USB hub found
[   43.334457] hub 3-0:1.0: 1 port detected
[   43.334654] PCI: Enabling device: (0000:0a:00.7), cmd 2
[   43.334679] ehci_hcd 0000:0a:00.7: enabling bus mastering
[   43.334696] ehci_hcd 0000:0a:00.7: EHCI Host Controller
[   43.334731] ehci_hcd 0000:0a:00.7: new USB bus registered, assigned bus number 4
[   43.334864] ehci_hcd 0000:0a:00.7: Enabling legacy PCI PM
[   43.363516] ehci_hcd 0000:0a:00.7: enabling Mem-Wr-Inval
[   43.363581] ehci_hcd 0000:0a:00.7: irq 7, io mem 0xca2030e000
[   43.383536] ehci_hcd 0000:0a:00.7: USB 2.0 started, EHCI 1.00
[   43.383635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[   43.383657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.383675] usb usb4: Product: EHCI Host Controller
[   43.383690] usb usb4: Manufacturer: Linux 2.6.32.20 ehci_hcd
[   43.383706] usb usb4: SerialNumber: 0000:0a:00.7
[   43.384114] usb usb4: configuration #1 chosen from 1 choice
[   43.384422] hub 4-0:1.0: USB hub found
[   43.384468] hub 4-0:1.0: 1 port detected
[   43.384890] ehci-amba usb@c: AMBA EHCI
[   43.384924] ehci-amba usb@c: new USB bus registered, assigned bus number 5
[   43.385274] ehci-amba usb@c: irq 12, io mem 0x8a00410000
[   43.403514] ehci-amba usb@c: USB 2.0 started, EHCI 1.00
[   43.403602] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[   43.403623] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.403641] usb usb5: Product: AMBA EHCI
[   43.403655] usb usb5: Manufacturer: Linux 2.6.32.20 ehci_hcd
[   43.403671] usb usb5: SerialNumber: AMBA USB EHCI
[   43.404070] usb usb5: configuration #1 chosen from 1 choice
[   43.404371] hub 5-0:1.0: USB hub found
[   43.404416] hub 5-0:1.0: 2 ports detected
[   43.404594] ehci-amba usb@e: AMBA EHCI
[   43.404627] ehci-amba usb@e: new USB bus registered, assigned bus number 6
[   43.405449] ehci-amba usb@e: irq 14, io mem 0x8a00420000
[   43.423501] ehci-amba usb@e: USB 2.0 started, EHCI 1.00
[   43.423589] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[   43.423612] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.423632] usb usb6: Product: AMBA EHCI
[   43.423646] usb usb6: Manufacturer: Linux 2.6.32.20 ehci_hcd
[   43.423663] usb usb6: SerialNumber: AMBA USB EHCI
[   43.424111] usb usb6: configuration #1 chosen from 1 choice
[   43.424420] hub 6-0:1.0: USB hub found
[   43.424465] hub 6-0:1.0: 2 ports detected
[   43.424830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   43.424934] ohci_hcd 0000:0a:00.0: OHCI Host Controller
[   43.424977] ohci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 7
[   43.425045] ohci_hcd 0000:0a:00.0: irq 8, io mem 0xca20300000
[   43.487608] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[   43.487630] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.487649] usb usb7: Product: OHCI Host Controller
[   43.487664] usb usb7: Manufacturer: Linux 2.6.32.20 ohci_hcd
[   43.487680] usb usb7: SerialNumber: 0000:0a:00.0
[   43.488086] usb usb7: configuration #1 chosen from 1 choice
[   43.488413] hub 7-0:1.0: USB hub found
[   43.488463] hub 7-0:1.0: 1 port detected
[   43.488678] ohci_hcd 0000:0a:00.2: OHCI Host Controller
[   43.488715] ohci_hcd 0000:0a:00.2: new USB bus registered, assigned bus number 8
[   43.488780] ohci_hcd 0000:0a:00.2: irq 5, io mem 0xca20304000
[   43.547593] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[   43.547614] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.547633] usb usb8: Product: OHCI Host Controller
[   43.547648] usb usb8: Manufacturer: Linux 2.6.32.20 ohci_hcd
[   43.547664] usb usb8: SerialNumber: 0000:0a:00.2
[   43.548070] usb usb8: configuration #1 chosen from 1 choice
[   43.548388] hub 8-0:1.0: USB hub found
[   43.548442] hub 8-0:1.0: 1 port detected
[   43.548650] ohci_hcd 0000:0a:00.4: OHCI Host Controller
[   43.548687] ohci_hcd 0000:0a:00.4: new USB bus registered, assigned bus number 9
[   43.548747] ohci_hcd 0000:0a:00.4: irq 6, io mem 0xca20308000
[   43.607599] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[   43.607624] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.607646] usb usb9: Product: OHCI Host Controller
[   43.607665] usb usb9: Manufacturer: Linux 2.6.32.20 ohci_hcd
[   43.607684] usb usb9: SerialNumber: 0000:0a:00.4
[   43.608148] usb usb9: configuration #1 chosen from 1 choice
[   43.608513] hub 9-0:1.0: USB hub found
[   43.608567] hub 9-0:1.0: 1 port detected
[   43.608810] ohci_hcd 0000:0a:00.6: OHCI Host Controller
[   43.608854] ohci_hcd 0000:0a:00.6: new USB bus registered, assigned bus number 10
[   43.608924] ohci_hcd 0000:0a:00.6: irq 7, io mem 0xca2030c000
[   43.667592] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[   43.667613] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.667632] usb usb10: Product: OHCI Host Controller
[   43.667647] usb usb10: Manufacturer: Linux 2.6.32.20 ohci_hcd
[   43.667663] usb usb10: SerialNumber: 0000:0a:00.6
[   43.668082] usb usb10: configuration #1 chosen from 1 choice
[   43.668400] hub 10-0:1.0: USB hub found
[   43.668449] hub 10-0:1.0: 1 port detected
[   43.668847] ohci-amba usb@d: USB Host Controller
[   43.668882] ohci-amba usb@d: new USB bus registered, assigned bus number 11
[   43.668947] ohci-amba usb@d: irq 11, io mem 0x8a00411000
[   43.725574] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[   43.725596] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.725617] usb usb11: Product: USB Host Controller
[   43.725634] usb usb11: Manufacturer: Linux 2.6.32.20 ohci_hcd
[   43.725652] usb usb11: SerialNumber: AMBA USB OHCI
[   43.726044] usb usb11: configuration #1 chosen from 1 choice
[   43.726351] hub 11-0:1.0: USB hub found
[   43.726397] hub 11-0:1.0: 2 ports detected
[   43.726584] ohci-amba usb@f: USB Host Controller
[   43.726619] ohci-amba usb@f: new USB bus registered, assigned bus number 12
[   43.726696] ohci-amba usb@f: irq 13, io mem 0x8a00421000
[   43.785574] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001
[   43.785596] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   43.785614] usb usb12: Product: USB Host Controller
[   43.785629] usb usb12: Manufacturer: Linux 2.6.32.20 ohci_hcd
[   43.785645] usb usb12: SerialNumber: AMBA USB OHCI
[   43.786037] usb usb12: configuration #1 chosen from 1 choice
[   43.786345] hub 12-0:1.0: USB hub found
[   43.786391] hub 12-0:1.0: 2 ports detected
[   43.786994] usbcore: registered new interface driver usblp
[   43.787512] mice: PS/2 mouse device common for all mice
[   43.789261] Linux video capture interface: v2.00
[   43.790002] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[   43.796264] usbcore: registered new interface driver hiddev
[   43.796520] usbcore: registered new interface driver usbhid
[   43.796541] usbhid: v2.6:USB HID core driver
[   43.796595] func:uart_amba_probe
[   43.796607] port.mapbase:592709689344
[   43.796961] console@18: ttyS1 at MMIO 0x8a00402000 (irq = 23) is a 16550A
[   43.797257] amba-uart ttyAMBAS0 probed,irq:23,port.type:4
[   43.797290] func:uart_amba_probe
[   43.797302] port.mapbase:592709690368
[   43.797619] console@19: ttyS2 at MMIO 0x8a00402400 (irq = 24) is a 16550A
[   43.797905] amba-uart ttyAMBAS1 probed,irq:24,port.type:4
[   43.801869] rtc-ds1307 3-0068: rtc core: registered ds1339 as rtc0
[   43.806241] ahci-amba sata@8: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl amba mode
[   43.806274] ahci-amba sata@8: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst
[   43.806742] scsi0 : ahci
[   43.807449] scsi1 : ahci
[   43.808004] ata1: SATA max UDMA/133 mmio [0x8b01000000-0x8b01001fff] port 0x100 irq 9
[   43.808027] ata2: SATA max UDMA/133 mmio [0x8b01000000-0x8b01001fff] port 0x180 irq 9
[   43.812140] ahci-amba sata@a: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl amba mode
[   43.812172] ahci-amba sata@a: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst
[   43.812621] scsi2 : ahci
[   43.813289] scsi3 : ahci
[   43.813838] ata3: SATA max UDMA/133 mmio [0x8c01000000-0x8c01001fff] port 0x100 irq 10
[   43.813861] ata4: SATA max UDMA/133 mmio [0x8c01000000-0x8c01001fff] port 0x180 irq 10
[   43.814809] Advanced Linux Sound Architecture Driver Version 1.0.21.
[   43.814826] ALSA device list:
[   43.814836]   No soundcards found.
[   43.815699] IPVS: Registered protocols ()
[   43.815766] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[   43.816075] IPVS: ipvs loaded.
[   43.818358] TCP cubic registered
[   43.818375] NET: Registered protocol family 17
[   43.824924] rtc-ds1307 3-0068: setting system clock to 2014-09-05 05:07:00 UTC (1409893620)
[   44.023522] usb 3-1: new high speed USB device using ehci_hcd and address 2
[   44.163511] ata2: SATA link down (SStatus 0 SControl 310)
[   44.163563] ata1: SATA link down (SStatus 0 SControl 310)
[   44.165762] ata4: SATA link down (SStatus 0 SControl 310)
[   44.178540] usb 3-1: New USB device found, idVendor=13fe, idProduct=4100
[   44.178561] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   44.178580] usb 3-1: Product: USB DISK 2.0
[   44.178593] usb 3-1: Manufacturer:
[   44.178609] usb 3-1: SerialNumber: 070D2AF2D655E500
[   44.179097] usb 3-1: configuration #1 chosen from 1 choice
[   44.343529] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   44.355059] ata3.00: ATA-8: KINGSTON SV300S37A60G, 505ABBF1, max UDMA/133
[   44.355082] ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   44.365101] ata3.00: configured for UDMA/133
[   44.385663] scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 505A PQ: 0 ANSI: 5
[   44.386785] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[   44.387087] sd 2:0:0:0: [sda] Write Protect is off
[   44.387108] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   44.387269] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   44.388123]  sda: sda1 sda2 sda3
[   44.390839] sd 2:0:0:0: [sda] Attached SCSI disk
[   44.471768] dracut: dracut-004-43.5.ft.ky3
[   44.483535] usb 7-1: new low speed USB device using ohci_hcd and address 2
[   44.527045] udev: starting version 145
[   44.679541] usb 7-1: New USB device found, idVendor=0a81, idProduct=0205
[   44.679567] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   44.679588] usb 7-1: Product: PS2 to USB Converter
[   44.679604] usb 7-1: Manufacturer: CHESEN
[   44.680251] usb 7-1: configuration #1 chosen from 1 choice
[   44.693737] input: CHESEN PS2 to USB Converter as /devices/root/f029cd34/pci0000:00/0000:00:01.0/0000:02:00.0/0000:03:04.0/0000:05:00.0/0000:06:0b.0/0000:0a:00.0/usb7/7-1/7-1:1.0/input/input0
[   44.694183] generic-usb 0003:0A81:0205.0001: input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:0a:00.0-1/input0
[   44.705801] input: CHESEN PS2 to USB Converter as /devices/root/f029cd34/pci0000:00/0000:00:01.0/0000:02:00.0/0000:03:04.0/0000:05:00.0/0000:06:0b.0/0000:0a:00.0/usb7/7-1/7-1:1.1/input/input1
[   44.706493] generic-usb 0003:0A81:0205.0002: input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:0a:00.0-1/input1
[   44.801853] [drm] Initialized drm 1.1.0 20060810
[   44.844393] usb 11-1: new full speed USB device using ohci-amba and address 2
[   45.026552] usb 11-1: New USB device found, idVendor=0d8c, idProduct=0105
[   45.026577] usb 11-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[   45.026596] usb 11-1: Product: USB Multimedia Audio Device
[   45.026612] usb 11-1: Manufacturer: C-Media Electronics Inc.
[   45.028735] usb 11-1: configuration #1 chosen from 1 choice
[   45.036290] input: C-Media Electronics Inc. USB Multimedia Audio Device as /devices/root/f02a56cc/usb@d/usb11/11-1/11-1:1.3/input/input2
[   45.036717] generic-usb 0003:0D8C:0105.0003: input: USB HID v1.00 Device [C-Media Electronics Inc. USB Multimedia Audio Device] on usb-AMBA USB OHCI-1/input3
[   45.074746] [drm] radeon defaulting to kernel modesetting.
[   45.074764] [drm] radeon kernel modesetting enabled.
[   45.075009] radeon 0000:01:00.0: enabling bus mastering
[   45.075931] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1002:0x0000).
[   45.075952] radeon: No suitable DMA available.
[   45.075965] [drm] register mmio base: 0x00200000
[   45.075978] [drm] register mmio size: 131072
[   47.870203] ATOM BIOS: Great
[   47.870342] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   47.870366] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   47.870385] [drm] Detected VRAM RAM=512M, BAR=256M
[   47.870398] [drm] RAM width 64bits DDR
[   47.870640] [TTM] Zone  kernel: Available graphics memory: 2031676 kiB.
[   47.870659] [TTM] Initializing pool allocator.
[   47.870764] [drm] radeon: 512M of VRAM memory ready
[   47.870781] [drm] radeon: 512M of GTT memory ready.
[   47.870846] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   47.870862] [drm] Driver supports precise vblank timestamp query.
[   47.870953] radeon 0000:01:00.0: radeon: using MSI.
[   47.871044] [drm] radeon: irq initialized.
[   47.871076] [drm] GART: num cpu pages 65536, num gpu pages 131072
[   47.872956] [drm] Loading CEDAR Microcode
[   47.872979] platform radeon_cp.0: firmware: requesting radeon/CEDAR_pfp.bin
[   47.886771] platform radeon_cp.0: firmware: requesting radeon/CEDAR_me.bin
[   47.900539] platform radeon_cp.0: firmware: requesting radeon/CEDAR_rlc.bin
[   47.924508] radeon 0000:01:00.0: WB enabled
[   47.941477] [drm] ring test succeeded in 0 usecs
[   47.942049] [drm] radeon: ib pool ready.
[   47.942372] [drm] ib test succeeded in 0 usecs
[   47.947370] [drm] Radeon Display Connectors
[   47.947385] [drm] Connector 0:
[   47.947396] [drm]   DisplayPort
[   47.947406] [drm]   HPD4
[   47.947423] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   47.947438] [drm]   Encoders:
[   47.947449] [drm]     DFP1: INTERNAL_UNIPHY
[   47.947462] [drm] Connector 1:
[   47.947471] [drm]   DVI-D
[   47.947481] [drm]   HPD1
[   47.947497] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   47.947511] [drm]   Encoders:
[   47.947522] [drm]     DFP2: INTERNAL_UNIPHY1
[   47.947533] [drm] Connector 2:
[   47.947543] [drm]   DVI-D
[   47.947552] [drm]   HPD2
[   47.947568] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   47.947583] [drm]   Encoders:
[   47.947594] [drm]     DFP3: INTERNAL_UNIPHY1
[   47.947605] [drm] Connector 3:
[   47.947615] [drm]   VGA
[   47.947631] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   47.947646] [drm]   Encoders:
[   47.947656] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   47.958016] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID
[   47.968364] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID
[   47.978740] [drm] Radeon display connector DVI-D-2: No monitor connected or invalid EDID
[   47.989126] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[   47.989241] [drm] Internal thermal controller with fan control
[   47.989681] [drm] radeon: power management initialized
[   48.249075] [drm] fb mappable at 0xCA10142000
[   48.