/************************************************************************* * windows ping RPi 2B * 声明: * 本文主要记录如何设置RPi 2B静态IP,并且通过windows来ping通RPi 2B。 * * 2016-2-15 深圳 南山平山村 曾剑锋 ************************************************************************/ 参考文章: <raspberry pi> raspberry pi 设置wlan 静态ip http://www.cnblogs.com/keygle/archive/2013/04/27/3048273.html 一、windows ip setting:
二、cat /etc/network/interfaces # 本人在ubuntu中修改RPi 2B文件系统中的/etc/network/interfaces ...... #iface eth0 inet manual auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.0.5 netmask 255.255.255.0 gateway 192.168.0.1 ...... 三、ping 192.168.0.5 > pingdata.txt Pinging 192.168.0.5 with 32 bytes of data: Reply from 192.168.0.5: bytes=32 time<1ms TTL=64 Reply from 192.168.0.5: bytes=32 time<1ms TTL=64 Reply from 192.168.0.5: bytes=32 time=1ms TTL=64 Reply from 192.168.0.5: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.5: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms
时间: 2024-09-21 17:32:56